Traxxas 109076-4 Funco Pro Scale Replica Fully Assembled Ready-To-Race RTR with TQi 2.4 GHz Radio System VXL-8S Brushless Power System and Replica Funco Clipless Body

Traxxas 109076-4 Funco Pro Scale Replica Fully Assembled Ready-To-Race RTR with TQi 2.4 GHz Radio System VXL-8s Brushless Power System and Replica Funco Clipless Body

King Of The Dunes
Driving a Funco sand car is an adrenaline-fueled thrill ride like nothing else on Earth. Outfitted with 1000+ horsepower engines and trick long-travel suspension systems, a Funco sand car can top 150 mph and wheelie with just a blip of the throttle. The Traxxas Funco Pro Scale Replica is a 55+ mph monster, purpose-built to deliver the same raw excitement and thrill of driving the full-size Funco Motorsports car in dramatic X-Series scale.

MODEL SPECS
- Name : Funco Pro Scale Replica
- Speed : 55+ mph with dual 4S LiPo batteries and speed gearing
- Scale : X-Series
- Length : 32 inches (812 mm)
- Width : 21.7 inches (551 mm)
- Ground Clearance : 1.98 inches (50 mm)
- Weight : 22.06 pounds (10 kg)
- Height : 11.1 inches (283 mm) (body), 19.6 inches (498 mm) (whip lights)
- Wheelbase : 21.4 inches (543 mm)
- Shock Length : 5.08 inches (129 mm) (front), 7.13 inches (181 mm) (rear)
- Tires (Arrow Pattern, Front) : 6.8″ x 2.3″ (173 mm x 58 mm)
- Tires (Paddle, Rear) : 7.5″ x 4.0″ (191 mm x 102 mm)
- Wheels (Front) : 3.2″ (82 mm, inner) x 4.9″ (125 mm, outer)
- Wheels (Rear) : 3.6″ (91 mm, inner) x 4.7″ (120 mm, outer)
- Speed Control : Velineon VXL-8s
- Motor : Velineon 1200XL Brushless
- Overall Drive Ratio : 16.4:1 (21/50 motor pinion and spur gear)
- Differential Type : Sealed, four-gear, limited-slip
- Gear Pitch : Module 1.5 (transmission), Module 1.0 (pinion & spur)
- Chassis Structure/Material : Reinforced Nylon Tub
- Brake Type : Electronic (rear), Dual vented discs (front)
- Driveline : Direct-drive, RWD
- Steering : Bellcrank
- Radio System : TQi 2.4 GHz Transmitter with TSM receiver
- Steering Servo : 2085XL metal gear (450 oz-in.)
- Skill Level : 5
- Battery Tray : 186 mm x 51 mm x 44 mm
- Required Batteries : 4 “AA” (transmitter) and 4-cell LiPo battery (x2)
 
MOTOR SPECS
- Name : Velineon 1200XL
- Type : 1275 Kv sensorless brushless
- Weight : 23.44 ounces (665 g)
- Length : 4.32 inches (110 mm)
- Diameter : 1.88 inches (48 mm)
- Shaft Size : 5 mm
- Connector Type : 6.5 mm bullet connectors
 
ESC SPECS
- Name : Velineon VXL-8s
- ESC Type : Brushless
- Case Size : 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
- Weight : 7.60 ounces (215.5 g)
- Motor Connectors : 6.5 mm bullet connectors
- Battery Connectors : Traxxas High-Current Connectors
- Power Wire : 10 gauge Maxx Cable

MODEL 109076-4: Funco Pro Scale Replica: fully assembled, Ready-To-Race, with TQi 2.4 GHz radio system, VXL-8s brushless power system, and Replica Funco clipless body.
 
What’s In The Box :
- Funco Pro Scale Replica with Traxxas Big Block brushless motor
- VXL-8s waterproof electronic speed control with integrated telemetry
- TQi 2.4 GHz radio system
- High visibility whip lights
- Wheelie bar
- Speed gearing
- High quality maintenance tools
 
What You’ll Need :
- LiPo Batteries
Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part 2890X) or the Dual 4S Completer Pack (Part 2997).
- LiPo Balance Charger with iD
Traxxas EZ-Peak Live Dual 4S-capable charger is recommended for easy and fast charging performance (model 2973).
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.
 
Contact our customer service if you need more information.